HEAT TREATMENT SALTS & CHEMICALS

  * Quenching, Marqueching &
   Tempering Salts & Oils
  * Case Hardening &
   Carburising Salts
Meprophos Phosphating Chemicals
Meproche Rust Preventives
Meproche Machining Fluids
Meproche Specialty Products 
Meproche Electroplating Salts
Meproche Paint Removers
Nitriding Salts and Fluids
DEHYDRATED SOLVENTS
  * Pyridine
  * Tetra Hydro furan (Upto    20 ppm maxm. moisture)
  * Acetonitrile
  * Di methyl Formamide
 

Meproche Machining Fluids

 
Meproche Machining Fluids (A) OIL TYPES 

(a) Meproche H-60 : Cutting oil - good for hard water - Gives milky emulsion with water - To be used at 4 % concentration -  Good E. P. properties. Used for drilling, turning, milling, boring etc.

(b) Meproche Antisep 'K' : Specially designed coolant base for grinding bearing races / rings - has high refrigerant base and is having E. P. additives - Product was specially developed for SKF - Pune.

(c) Meproche Conc Soluble Grinding Fluid : Water thinneable - Semi synthetic - Solution type - Very good 
bactieria cidal   properties - Good rust preventives - 2% concentration passes IS specification - Used 4% - Mainly for steel ball manufacturing.

(d) Meproche STG : Transparent grinding coolant - good corrosion inhibitions - Use 2 to 10% depending on application -   Fully Synthetic - water soluble - suitable for centreless grinding, cylindrical and surface grinding.

(B) MEPROCHE DEWATERING FLUID

For removal of moisture from jobs which are machined by water based coolants. The water so removed gets settled at bottom and can be drained out.

(C) MEPROCHE BROACHING OIL
For high heat removal - good swarf removal capacity - Imparts very good surface finish - Non Inflammable
(D) MEPROCHE HONNING OIL
Specially designed coolant - Very thin consistency - Used for honing - compounded with rust -inhibitors, wetting agents, anti oxidants and water repellants.
(E) MEPROCHE DRAWING OIL 431
Thick consistency - Used for wire ropes - Removes heat and lubricates the die - gives good surface finish. 
(F) MEPROCHE TTL

A synthetic lubricant - Used for processing nonferrous metals. Does not leave any film or soot after annealing. Used for extrusion / drawing of sections.